DIY Floating Shelves

IMG_7356

I am so excited to FINALLY share this project with you all! I have been working on it for what feels like forever. Wait…you mean…having a baby will drastically change the amount of time in the day you have to accomplish things?!?! Case in point, I’ve been trying to write this blog post for 3 days now 🙂

When I started placing the furniture in the nursery, I knew I wanted this corner to be the “play” corner or the area for all the toys. Landon already owns quite a few books so a book shelf seemed like the way to go but I also wanted room for some sort of toy box (a post on that to come in the future) so shelves up on the wall were necessary for space. Enter the DIY Floating Shelves from Shanty 2 Chic. If you haven’t checked out their site before and you enjoy DIY building, check them out. If you’ve ever searched for DIY building projects on Pinterest, chances are you’ve come across some of their work. Their projects are always really well explained and the plans are very detailed.

I did make some adjustments to the original plans because the plans called shelves that were 3.5′ in either direction and I only had room for 2′. So, my plans are for 2′ long corner shelves and the materials listed are enough for 3 shelves. If you follow the plans on Shanty 2 Chic, their plans are for 3.5′ shelves and the materials listed are for 1 shelf so make sure you double or triple the amount of wood depending on how many shelves you want.

So, here we go…step by step 🙂

Supplies
NOTE: Before purchasing the wood, see the note in step 6 regarding the 2×4 and 1×6 boards

3 – 2″ x 4″ x 8′
2 – 1/4″ x 24″ x 48″ plywood
2 – 1″ x 10″ x 8′
2 – 1″ x 6″ x 8′
kreg jig for pocket holes
drill
2 1/2″ pocket screws
nail gun
1 1/4″ brad nails
3″ screws (torx or dry wall, whatever you prefer, these will be to screws the support boards to the wall and into a stud)
stud finder
wood glue
paint
hardware (for decorative purposes, I’ll show you what I used when I get to that part below)

Step 1: You will need to determine the height placement of each shelf. You want to think about what you are going to put on the shelves and how much space you need in between each one. I wanted my shelves to take up the majority of the corner and knew I was going to be putting some taller items and books on them so here are the measurements I used…
Floor to ceiling, the room is 96″ tall. Each shelf is approximately 4.5″ tall. Based on that, I measured out equal spacing from ceiling to the top shelf, between each shelf, and from bottom shelf to the floor, which was 20.5″.
Ceiling
20.5″
Shelf #1: 4.5″
20.5″
Shelf #2: 4.5″
20.5″
Shelf #3: 4.5″
20.5″
Floor

You will also want to locate the studs in your wall and mark those as well as you will drill each wall cleat directly into a stud.

Step 2: Build your wall cleats.
Using the 2″ x 4″ x 8′, make the following cuts
3 pieces @ 2′ (long wall cleat)
3 pieces @ 1′ 10 1/2″ (short wall cleat)
12 pieces @ 7 5/8″ (cleat braces)

When constructing each wall cleat, you will use one long wall cleat, one short wall cleat and 4 cleat braces, 2 1/2″ pocket screws and wood glue.
Using a kreg jig, drill for 2 1/2″ pocket screws into one end of each cleat brace then attach the cleat braces to the cleats as shown. I didn’t measure the placement of the cleat braces, just lined up the wall cleats (long wall cleat against the corner, short wall cleat against the long wall cleat) and then marked where the cleat braces should go so that they just met each other at the corner edge. The other two cleat braces went at the opposite ends of the wall cleats.

IMG_7179

Step 3: Attach wall cleats to the wall
Use a drill bit that is slightly smaller than the 3″ screws. Line up a wall cleat where you want it and drill a pilot hold into the wall cleat directly over the stud, check for level. Using the 3″ screws, attach the wall cleat to the wall in at least 2 different points.

IMG_7178

Step 4: Attach bottom panels to braces
You are basically going to wrap the braces in wood to build out your shelf. Using the 1/4″ plywood, make the following cuts (I made the cuts at home but if you don’t have a saw, you can ask some in the lumber department to make the cuts for you)
3 pieces @ 23 1/4″ x 9 1/4″ (long bottom panel)
3 pieces @ 14″ x 9 1/4″ (short bottom panel)
Use a wood glue, a nail gun and 1/4″ brad nails to attach 1 long bottom panel and 1 short bottom panel to each set of braces.

IMG_7182

IMG_7187

Step 5: Attach top panel to braces
Using the 1″ x 10″ x 8′ make the following cuts
3 pieces @ 23 1/4″ (long top panel)
3 pieces @ 14″ (short top panel)
Attach 1 long top panel and 1 short top panel to each set of braces using wood glue, 1 1/4″ finish nails and a nail gun.

IMG_7195IMG_7198

Step 6: Attach the side trim
Using the 1″ x 6″ x 8′ make the following cuts
6 pieces @ 4 1/2″ x 9 1/4″ (side front trim)
NOTE: Because 2×4 are used for the wall cleats, it requires the front and side trim to be only 4 1/2″ wide which is not a width you can buy and will have to rip the board down to 4 1/2″. Again, you can have them do it for you in the lumber department. If you have a table saw at home then you can do it yourself. The other option would be to use 2″ x 3″ for the walls cleats instead of 2″ x 4″. By using 2″ x 3″, you will not need to alter the width of the 1″ x 6″ boards.
Attach side front trim pieces using the same method, wood glue, a nail gun and 1 1/4″ finish nails.

IMG_7240

Step 7: Attach front trim pieces
Using the remaining 1″ x 6″ x 8′ boards, make the following cuts
3 pieces @ 14 3/4″ x 4 1/2″
3 pieces @ 14″ x 4 1/2″
Attach using the same method, wood glue, a nail gun and 1 1/4″ finish nails

IMG_7246

Step 8: Finish with paint and decorate!
I used wood filler to fill in nail holes and the seams. Once dried, I went over the wood filler with 180 grit sand paper to smooth it out.

IMG_7331

I used Heirloom Traditions chalk paint in A La Mode to finish the shelves, topped with clear wax, and sanded the edges for a roughed up look.

Finally, I added some hardware to the corners to give the shelves a bit of an industrial look to compliment some of the other pieces in the nursery.

IMG_7311

I used metal corner braces similar to these from Lowes, and furniture tacks to attach them, spray painted all the pieces with black matte finish spray paint and roughed them up with some sand paper before attaching.

IMG_7306

That’s that! Then I decorated 🙂

IMG_7354IMG_7347IMG_7345IMG_7353

IMG_7356

Advertisements

Inspired by…Grain Mill turned Farmhouse

My mom is really going to LOVE this post 🙂 Pretty sure her dream is to turn an old barn into a home. Or at least into an event venue that she can run a business out of. Well mama, here is your inspiration! This is a 161 year old grain mill that was bought and remodeled by a couple of antique dealers, obviously they knew what they were doing.

The first image is the before…and the transformation is just magic. Now let’s go find a barn to buy mom!

01-20-101-20-2CLX010117_05701-20-4CLX010117_058CLX010117_05901-20-7CLX010117_062CLX010117_062CLX010117_060CLX010117_061

Original article from Country Living

Nursery Crib

img_7033

Someone contacted me asking about some of the furniture details in Landon’s nursery and I realized that I never shared the finished crib! No time like the present…

I remember sharing a while back that I was having trouble finding a crib that I liked. I wanted white distressed wood. Everything I was finding in white was smooth finish and everything in a distressed finish was off-white or almost yellow. Of course, I have no problem painting a piece of furniture 🙂 but if I was going to put work in to it, I didn’t want to spend a lot. I searched some thrift stores but there’s not a lot of cribs out there. Enter Wayfair.com.

I went on Wayfair.com just to see what they had. I had purchased my office chair from Joss & Main, which is a sister company of Wayfair.com, and loved it so I thought I’d check it out. Turns out, there are a lot of options under $250! The crib I chose is by Viv & Rae, called the Rocco Kokopelli Convertible Crib.

3

What I loved about this crib was the “shutter-like” look on the endcaps. I knew the raised edges would give great texture when I distressed it. Unfortunately, this crib is sold out 😦 However, if you go on Wayfair.com and search cribs, there is an option on the left side of the screen to select “cribs under $200” and there are lots of options to choose from.

My favorites, to get a similar look to what I did would be…
Camden 4-in-1 Convertible Crib by Child Craft
Harbor Lights 4-in-1 Convertible Crib by Graco
Watterson 4-in-1 Convertible Crib by Child Craft
And, the first 2 options come in multiple finishes, in case you don’t want to refinish or paint.

To refinish the crib I used Heirloom Traditions chalk paint in A La Mode. Heirlooms Tradition, as most chalk paint, is non-toxic and safe to use on furniture that a baby may put it’s mouth on. You just want to make sure to let the paint cure for a few weeks before baby would have it’s mouth near the furniture. The thing you don’t want to use in this case, is the soft wax. I didn’t use the soft wax this time and it didn’t really affect the distressing. The biggest benefit of the wax is that it seals the paint, protecting it from chipping and stains.

*Quick tip: assemble your crib before you paint it!

There are so many nooks and crannies and areas that will not be visible and therefore don’t need paint, you will save so much time if the crib is assembled first.

Once painted, I used 100 grit sandpaper to sand the edges. I used a coarser sand paper because I really wanted the dark brown to show through. I didn’t sand any flat surface, just ran the sand paper along each edge.

2

img_7037

That’s all folks! Pretty simple transformation. And for those wondering, the crib bedding is the Vintage Ticking Stripe and Vintage Washed Percale Collection from Restoration Hardware.

Vintage Scoreboard was made by me and you can find the instructions here.

img_7032img_7036img_7034

DIY Blanket Ladder

img_6764

Can we talk about the LIFE-CHANGING discovery I made a couple weeks ago. It was an average night, we had just eaten dinner and were sitting on the couch when the inevitable conversation came up…”Did you get anything for dessert?” my husband asks…
I hadn’t…fail.
Me: “No, but there is still vanilla ice cream in the freezer from Thanksgiving pie”
Husband: “Do we have anything to put on it?”
In case you can’t tell, I’m not good at keeping my fridge/pantry/cupboards stocked with the basics. I’m the type who goes to the store and buys just what I need for that nights dinner.
Me: “There are some leftover chocolate chips in the cupboard…”
Husband: “Can you melt them?”
We have really interesting conversations 🙂
I proceed to melt the leftover chocolate chips, dish up some ice cream and then drizzle the chocolate on top. Basic, right?
Umm…it hardened pretty quickly just like magic shell, but I hadn’t added anything to it! Is this normal?!?! Mic drop! I was so excited!! That’s the easiest dessert ever!
I’m not sure why I was so excited, apparently it doesn’t take much these days. Anyway, I was pretty stoked about this discovery, and please don’t burst my bubble if I’m like 10 years late to the party and you all knew this fact long ago.

You may recognize this blanket ladder from a couple years ago if you’ve been following me from the start…wow, that’s crazy, that I’ve been at this blogging thing for a couple years now! Since my time is a bit preoccupied these days and I haven’t had time to complete any new projects recently, I thought I’d repost one of my faves and one of the easiest, who knows, maybe you know someone that this would make a great holiday gift for. Or maybe you just want one for yourself. Either way, this whole project took me less than hour from constructing to stained.

Supplies
2 2×4 @ 8ft
1 2×6 @ 8ft
2″ wood screws
skill saw
kreg jig
drill

1. Use your skill saw to make the following cuts
2 2×4 cut to 5ft each
4 2×6 cut to 17in each

IMG_3971

2. Use your kreg jig to drill 4 pocket holes (2 on each end) into the 4 2×6 pieces for 2″ wood screws

IMG_3975

3. Lay one of the 2x4s on flat, level ground. The left side of the 2×4 will be the front of your ladder. Measure and mark every 12″ along the front of the ladder where your rungs will sit. Take one of the 2x6s and set it on the 2×4, turned slightly diagonal, so that the bottom of the 2×6 is even with the front of your ladder and the top of the 2×6 is even with the back of the ladder. Attach with 2″ wood screws.

IMG_3976

4. Continue with the other 3 2x6s at each of the 12″ marks.

IMG_3981

5. Once you’ve attached all 2x6s, measure and mark every 12″ on the other 2×4, lay it on flat, level ground and turn the ladder over onto the 2×4 so that the rungs meet up with the opposite side and attach with 2″ wood screws.

IMG_3984

Easy peasy! Now paint or stain to your desired color, let dry and add blankets!

img_6765img_6767img_6763

Inspired by…Sag Harbor Country Home

I’ve been working like a mad woman on so many different things…baby shower details, baby registry lists, nursery design, plus getting some random projects finished up around the house before baby arrives. Planning for baby is so much more overwhelming than you originally think it is. I want to tie up loose ends on things that have been sitting that I know will not be a priority after baby arrives, plus baby classes, all the things you have to think about and buy (some of which requires research into the best of the best, if you’re crazy like me) and on top of that, not always feeling the greatest while doing it. Not to mention working a full-time job. I’m tired just typing this!

Anyway, I feel like this blogging journey has been a juggling act since I went back to work…how do I run a household, complete DIY projects and remodeling, post to the blog and have time for work, family and friends. I guess it sounds like I’m complaining but a part of me loves juggling it all. Blogging for me is a bit of a release, a happy place. I get to do, write and post about things that I love. So while it may make me crazy from time to time, I do it because I love the feeling of accomplishment I have after finishing a project and posting about it.

Adding to that, a new baby and all that comes with it, I have been feeling even more like, how do I do it all. My friend Janine sent me a link to a You Tube video by one of my favorite bloggers, Damsel In Dior, and it was a great reminder of how to keep it all doing when you’re trying to do it all. So for all my fellow bloggers out there, or if you’re thinking about starting a blog, watch this video…

https://www.youtube.com/watch?v=VDI2U5EM3DI

I came across this Sag Harbor country home on My Domaine. The photos and original article are from the August 2016 issue of Elle Décor. The home is owned by Mona Nerenberg, who owns a home design shop, Bloom, in Sag Harbor, NY and was co-designed by Mark Cunningham. I may very well do a separate post on Bloom because it is the chicest little rustic shop I’ve ever seen! And side note, it is frequented by Martha Stewart and Gweneth Paltrow…NBD. Anyway, this is home is the epitome of chic, rustic, country charm and looks like the kind of retreat I could hideaway in forever!

Excuse me while I go house hunting for a country cottage just like this 🙂

07.15.107.15.207.15.307.15.407.15.507.15.607.15.707.15.807.15.907.15.10