I think I officially have a toddler. I mean, when I spend the entire day either chasing the little munchkin or saying “No, Landon…no, no, no….Landon, that’s not to play with” that equals toddler, right?!?! When he first learned what the word “no” meant, he would usually stop whatever behavior I was saying no to. Now, he is testing the limits and repeating the behavior, over and over and over. The latest, picking food up off his high chair tray, holding his food-filled fist for me to see and dropping it while I tell him not to drop the food. Big heavy sigh.
Once Landon turned 4 months, we started accumulating toys at rapid pace so I needed a place to store them. I started searching for toy boxes and toy storage. There were some cute options out there but not a lot that really went with his nursery or my décor style. Baskets would have been the best option if I had a big shelving unit to store them on, but, space in the nursery was becoming limited.
I came across this unfinished wood toy box on Wayfair and decided to customize it to fit the style of the room.
I painted the toy box white with Heirloom Traditions A La Mode chalk paint, 3 coats total, and then used DIY Big Top Aftershow top coat. I followed it up with a light sanding on the edges with 180 grit sandpaper.
Next, I decided to add a padded seat to the top of the toy box. I added the hinges to the lid so that I could cut and attach the padding and fabric around them. Lay out your fabric on the ground (design side down), making sure that if you are using fabric with a pattern, you pay attention to the placement and angle of the pattern. Next, lay out a piece of 1″ foam on top of the fabric followed by the lid placed upside down on top of the foam. At this point, you can cut the foam and the fabric to the appropriate dimensions. Leave a 1″ border of foam around the toy box lid. Leave a 2″ border between the fabric and foam to allow for folding the edges over and attaching with staples.
To attach the padding and fabric, I folded the edge of the fabric over on itself, the folded the remaining edge of the fabric over the foam and toy box lid, securing it with staples and my electric staple gun. When you are securing the fabric, work on one side at a time and secure only to within 2″ of each corner so that the fabric at the corners is loose. You are going to make some cuts and folds in order to tuck the corner fabric in. Also, when securing the fabric on the hinge side, staple everywhere except at the hinges, leaving the fabric loose there as well.
To secure corners, you want to cut away the extra layers of fabric that were folded under, leaving only 1 layer of fabric. Take the tip of fabric at the corner, fold it over the lid and secure with a staple. You should now have loose fabric on either side of the corner. On each side, you will fold and roll the fabric under itself at an angle so that when you bring the two sides together they will meet at the corner. Secure with staples.
To secure fabric around hinges, again, cut away some of the layers so you have just 1 layer of fabric, refold the fabric so that it fits around the hinge and secure with staples.
Once I attached the lid to the toy box, I wanted to add a little more detail so I picked up some metal T strap and L strap angles , spray painted them black and attached them at each corner for a little industrial touch.
That’s it! Totally customizable to your color and design! Just change paint color, fabric, spray paint and done 🙂