DIY Floating Shelves

IMG_7356

I am so excited to FINALLY share this project with you all! I have been working on it for what feels like forever. Wait…you mean…having a baby will drastically change the amount of time in the day you have to accomplish things?!?! Case in point, I’ve been trying to write this blog post for 3 days now 🙂

When I started placing the furniture in the nursery, I knew I wanted this corner to be the “play” corner or the area for all the toys. Landon already owns quite a few books so a book shelf seemed like the way to go but I also wanted room for some sort of toy box (a post on that to come in the future) so shelves up on the wall were necessary for space. Enter the DIY Floating Shelves from Shanty 2 Chic. If you haven’t checked out their site before and you enjoy DIY building, check them out. If you’ve ever searched for DIY building projects on Pinterest, chances are you’ve come across some of their work. Their projects are always really well explained and the plans are very detailed.

I did make some adjustments to the original plans because the plans called shelves that were 3.5′ in either direction and I only had room for 2′. So, my plans are for 2′ long corner shelves and the materials listed are enough for 3 shelves. If you follow the plans on Shanty 2 Chic, their plans are for 3.5′ shelves and the materials listed are for 1 shelf so make sure you double or triple the amount of wood depending on how many shelves you want.

So, here we go…step by step 🙂

Supplies
NOTE: Before purchasing the wood, see the note in step 6 regarding the 2×4 and 1×6 boards

3 – 2″ x 4″ x 8′
2 – 1/4″ x 24″ x 48″ plywood
2 – 1″ x 10″ x 8′
2 – 1″ x 6″ x 8′
kreg jig for pocket holes
drill
2 1/2″ pocket screws
nail gun
1 1/4″ brad nails
3″ screws (torx or dry wall, whatever you prefer, these will be to screws the support boards to the wall and into a stud)
stud finder
wood glue
paint
hardware (for decorative purposes, I’ll show you what I used when I get to that part below)

Step 1: You will need to determine the height placement of each shelf. You want to think about what you are going to put on the shelves and how much space you need in between each one. I wanted my shelves to take up the majority of the corner and knew I was going to be putting some taller items and books on them so here are the measurements I used…
Floor to ceiling, the room is 96″ tall. Each shelf is approximately 4.5″ tall. Based on that, I measured out equal spacing from ceiling to the top shelf, between each shelf, and from bottom shelf to the floor, which was 20.5″.
Ceiling
20.5″
Shelf #1: 4.5″
20.5″
Shelf #2: 4.5″
20.5″
Shelf #3: 4.5″
20.5″
Floor

You will also want to locate the studs in your wall and mark those as well as you will drill each wall cleat directly into a stud.

Step 2: Build your wall cleats.
Using the 2″ x 4″ x 8′, make the following cuts
3 pieces @ 2′ (long wall cleat)
3 pieces @ 1′ 10 1/2″ (short wall cleat)
12 pieces @ 7 5/8″ (cleat braces)

When constructing each wall cleat, you will use one long wall cleat, one short wall cleat and 4 cleat braces, 2 1/2″ pocket screws and wood glue.
Using a kreg jig, drill for 2 1/2″ pocket screws into one end of each cleat brace then attach the cleat braces to the cleats as shown. I didn’t measure the placement of the cleat braces, just lined up the wall cleats (long wall cleat against the corner, short wall cleat against the long wall cleat) and then marked where the cleat braces should go so that they just met each other at the corner edge. The other two cleat braces went at the opposite ends of the wall cleats.

IMG_7179

Step 3: Attach wall cleats to the wall
Use a drill bit that is slightly smaller than the 3″ screws. Line up a wall cleat where you want it and drill a pilot hold into the wall cleat directly over the stud, check for level. Using the 3″ screws, attach the wall cleat to the wall in at least 2 different points.

IMG_7178

Step 4: Attach bottom panels to braces
You are basically going to wrap the braces in wood to build out your shelf. Using the 1/4″ plywood, make the following cuts (I made the cuts at home but if you don’t have a saw, you can ask some in the lumber department to make the cuts for you)
3 pieces @ 23 1/4″ x 9 1/4″ (long bottom panel)
3 pieces @ 14″ x 9 1/4″ (short bottom panel)
Use a wood glue, a nail gun and 1/4″ brad nails to attach 1 long bottom panel and 1 short bottom panel to each set of braces.

IMG_7182

IMG_7187

Step 5: Attach top panel to braces
Using the 1″ x 10″ x 8′ make the following cuts
3 pieces @ 23 1/4″ (long top panel)
3 pieces @ 14″ (short top panel)
Attach 1 long top panel and 1 short top panel to each set of braces using wood glue, 1 1/4″ finish nails and a nail gun.

IMG_7195IMG_7198

Step 6: Attach the side trim
Using the 1″ x 6″ x 8′ make the following cuts
6 pieces @ 4 1/2″ x 9 1/4″ (side front trim)
NOTE: Because 2×4 are used for the wall cleats, it requires the front and side trim to be only 4 1/2″ wide which is not a width you can buy and will have to rip the board down to 4 1/2″. Again, you can have them do it for you in the lumber department. If you have a table saw at home then you can do it yourself. The other option would be to use 2″ x 3″ for the walls cleats instead of 2″ x 4″. By using 2″ x 3″, you will not need to alter the width of the 1″ x 6″ boards.
Attach side front trim pieces using the same method, wood glue, a nail gun and 1 1/4″ finish nails.

IMG_7240

Step 7: Attach front trim pieces
Using the remaining 1″ x 6″ x 8′ boards, make the following cuts
3 pieces @ 14 3/4″ x 4 1/2″
3 pieces @ 14″ x 4 1/2″
Attach using the same method, wood glue, a nail gun and 1 1/4″ finish nails

IMG_7246

Step 8: Finish with paint and decorate!
I used wood filler to fill in nail holes and the seams. Once dried, I went over the wood filler with 180 grit sand paper to smooth it out.

IMG_7331

I used Heirloom Traditions chalk paint in A La Mode to finish the shelves, topped with clear wax, and sanded the edges for a roughed up look.

Finally, I added some hardware to the corners to give the shelves a bit of an industrial look to compliment some of the other pieces in the nursery.

IMG_7311

I used metal corner braces similar to these from Lowes, and furniture tacks to attach them, spray painted all the pieces with black matte finish spray paint and roughed them up with some sand paper before attaching.

IMG_7306

That’s that! Then I decorated 🙂

IMG_7354IMG_7347IMG_7345IMG_7353

IMG_7356

Advertisements

Inspired by…black & white

We are going on hour 12 of baby sleep! He woke up at 5:45 to eat, but other than that, has been out since 9pm last night 🙂 I’ve been doing a little trial and error as far as sleep routines go and we may have found a good balance yesterday. I’ll keep it going for a few days and report back if continues to be this successful.

I’ve been having trouble finding inspiration and getting projects done these days, mostly due to lack of time to just sit around surfing Pinterest or having an extended period of time to accomplish anything. I started my first building project since Landon was born about a week ago and, so far, I’ve only completed step 1. Insert face palm emoji here. I think I need to learn to let go a bit, especially the expectation of always having a clean house. I wake up when baby wakes up. Take a shower and get ready for the day during nap #1. Pick up the house, do dishes and laundry and check emails, Insta and Facebook during #2. Run errands during nap #3. By this time it’s usually 2 or 3pm and it leaves 1 or 2 more naps, one of which is usually spent getting dinner ready. This 12 hour sleeping situation could really help me out if I just stay awake after that 5 or 6am feeding, so, Landon…let’s keep this up…okay?

I am excited to share my first building project in a long time with you guys! I am building floating corner shelves in the nursery. They are actually pretty easy and are such a great way to fill space in a functional way in those awkward corners that you never know what to do with. Anyway, until then, I thought I’d hold you over with some inspiration. I’m loving the combination and contrast of black and white right now. I still LOVE all white neutrals but I really like to add black (especially wrought iron) or wood accents.

Enjoy!

02-07-102-07-202-07-302-07-1202-07-402-07-502-07-602-07-1502-07-702-07-802-07-902-07-1402-07-1002-07-1102-07-13

Inspired by…Grain Mill turned Farmhouse

My mom is really going to LOVE this post 🙂 Pretty sure her dream is to turn an old barn into a home. Or at least into an event venue that she can run a business out of. Well mama, here is your inspiration! This is a 161 year old grain mill that was bought and remodeled by a couple of antique dealers, obviously they knew what they were doing.

The first image is the before…and the transformation is just magic. Now let’s go find a barn to buy mom!

01-20-101-20-2CLX010117_05701-20-4CLX010117_058CLX010117_05901-20-7CLX010117_062CLX010117_062CLX010117_060CLX010117_061

Original article from Country Living

Nursery Crib

img_7033

Someone contacted me asking about some of the furniture details in Landon’s nursery and I realized that I never shared the finished crib! No time like the present…

I remember sharing a while back that I was having trouble finding a crib that I liked. I wanted white distressed wood. Everything I was finding in white was smooth finish and everything in a distressed finish was off-white or almost yellow. Of course, I have no problem painting a piece of furniture 🙂 but if I was going to put work in to it, I didn’t want to spend a lot. I searched some thrift stores but there’s not a lot of cribs out there. Enter Wayfair.com.

I went on Wayfair.com just to see what they had. I had purchased my office chair from Joss & Main, which is a sister company of Wayfair.com, and loved it so I thought I’d check it out. Turns out, there are a lot of options under $250! The crib I chose is by Viv & Rae, called the Rocco Kokopelli Convertible Crib.

3

What I loved about this crib was the “shutter-like” look on the endcaps. I knew the raised edges would give great texture when I distressed it. Unfortunately, this crib is sold out 😦 However, if you go on Wayfair.com and search cribs, there is an option on the left side of the screen to select “cribs under $200” and there are lots of options to choose from.

My favorites, to get a similar look to what I did would be…
Camden 4-in-1 Convertible Crib by Child Craft
Harbor Lights 4-in-1 Convertible Crib by Graco
Watterson 4-in-1 Convertible Crib by Child Craft
And, the first 2 options come in multiple finishes, in case you don’t want to refinish or paint.

To refinish the crib I used Heirloom Traditions chalk paint in A La Mode. Heirlooms Tradition, as most chalk paint, is non-toxic and safe to use on furniture that a baby may put it’s mouth on. You just want to make sure to let the paint cure for a few weeks before baby would have it’s mouth near the furniture. The thing you don’t want to use in this case, is the soft wax. I didn’t use the soft wax this time and it didn’t really affect the distressing. The biggest benefit of the wax is that it seals the paint, protecting it from chipping and stains.

*Quick tip: assemble your crib before you paint it!

There are so many nooks and crannies and areas that will not be visible and therefore don’t need paint, you will save so much time if the crib is assembled first.

Once painted, I used 100 grit sandpaper to sand the edges. I used a coarser sand paper because I really wanted the dark brown to show through. I didn’t sand any flat surface, just ran the sand paper along each edge.

2

img_7037

That’s all folks! Pretty simple transformation. And for those wondering, the crib bedding is the Vintage Ticking Stripe and Vintage Washed Percale Collection from Restoration Hardware.

Vintage Scoreboard was made by me and you can find the instructions here.

img_7032img_7036img_7034

Inspired by…French Country Home

I’m having an INSANELY lazy day today and I’m loving every minute of it! I was up at 4:30am the last 2 mornings for work and it really took it’s toll. This morning I slept in late, had breakfast and coffee with my hubby and am now laying in bed, blogging and watching…you guessed it…re-runs of Fixer Upper (it’s Tuesday, isn’t that what everyone does on Tuesday?) 🙂

Today I’m featuring this ranch house from season 2 of Fixer Upper because I am obsessed with the French Country style it has.

Tufted furniture, muted colors, white washed brick…I’m loving it all!

One of my favorite things in this house are the faux paper white bulbs planted in wood trays in the bottom left picture.

I just ordered a few to create an arrangement as well as the magnolia wreath, both from Magnolia Market (links to both are below). I’m so excited for these to arrive and share with you how I use them in my home.

03.01.16

 Faux Magnolia Wreath

03.01.17

Faux Paper White Bulb