DIY Blanket Ladder

img_6764

Can we talk about the LIFE-CHANGING discovery I made a couple weeks ago. It was an average night, we had just eaten dinner and were sitting on the couch when the inevitable conversation came up…”Did you get anything for dessert?” my husband asks…
I hadn’t…fail.
Me: “No, but there is still vanilla ice cream in the freezer from Thanksgiving pie”
Husband: “Do we have anything to put on it?”
In case you can’t tell, I’m not good at keeping my fridge/pantry/cupboards stocked with the basics. I’m the type who goes to the store and buys just what I need for that nights dinner.
Me: “There are some leftover chocolate chips in the cupboard…”
Husband: “Can you melt them?”
We have really interesting conversations 🙂
I proceed to melt the leftover chocolate chips, dish up some ice cream and then drizzle the chocolate on top. Basic, right?
Umm…it hardened pretty quickly just like magic shell, but I hadn’t added anything to it! Is this normal?!?! Mic drop! I was so excited!! That’s the easiest dessert ever!
I’m not sure why I was so excited, apparently it doesn’t take much these days. Anyway, I was pretty stoked about this discovery, and please don’t burst my bubble if I’m like 10 years late to the party and you all knew this fact long ago.

You may recognize this blanket ladder from a couple years ago if you’ve been following me from the start…wow, that’s crazy, that I’ve been at this blogging thing for a couple years now! Since my time is a bit preoccupied these days and I haven’t had time to complete any new projects recently, I thought I’d repost one of my faves and one of the easiest, who knows, maybe you know someone that this would make a great holiday gift for. Or maybe you just want one for yourself. Either way, this whole project took me less than hour from constructing to stained.

Supplies
2 2×4 @ 8ft
1 2×6 @ 8ft
2″ wood screws
skill saw
kreg jig
drill

1. Use your skill saw to make the following cuts
2 2×4 cut to 5ft each
4 2×6 cut to 17in each

IMG_3971

2. Use your kreg jig to drill 4 pocket holes (2 on each end) into the 4 2×6 pieces for 2″ wood screws

IMG_3975

3. Lay one of the 2x4s on flat, level ground. The left side of the 2×4 will be the front of your ladder. Measure and mark every 12″ along the front of the ladder where your rungs will sit. Take one of the 2x6s and set it on the 2×4, turned slightly diagonal, so that the bottom of the 2×6 is even with the front of your ladder and the top of the 2×6 is even with the back of the ladder. Attach with 2″ wood screws.

IMG_3976

4. Continue with the other 3 2x6s at each of the 12″ marks.

IMG_3981

5. Once you’ve attached all 2x6s, measure and mark every 12″ on the other 2×4, lay it on flat, level ground and turn the ladder over onto the 2×4 so that the rungs meet up with the opposite side and attach with 2″ wood screws.

IMG_3984

Easy peasy! Now paint or stain to your desired color, let dry and add blankets!

img_6765img_6767img_6763

Advertisements

3 thoughts on “DIY Blanket Ladder

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s