Red White & Blueberry Popsicles

IMG_2539
I made these popsicles last summer for the first time and it is one of my favorite posts. Not only are they delicious, but they are healthy and so cute, all at the same time.

Be warned, when making striped popsicles, it does take a little time because you have to freeze each layer before adding the next but it was so much fun for me to make these over the course of the day. Might be a fun project for little ones to help with on a warm summer day and keep them looking forward to the next step all day long before finally getting to devour these delicious treats.

Everyone have a fun and safe 4th of July, take time to enjoy the family, friends, food and fireworks!

Red White & Blueberry Yogurt Popsicles
Makes 6 popsicles
1 cup blueberries
1 1/2 cup raspberries
1 cup vanilla Greek yogurt

1. Use a food processor to puree the blueberries. If they come out a bit more purple than blue (like mine did) just add a spoonful or two of the Greek Yogurt and a few drops of blue food coloring until you get the desired shade of blue. When you achieve the right color, you want to make sure the fruit is pourable, if it is too thick, try adding a tablespoon of water. You can also puree your raspberries ahead of time, adding 1-2 tablespoons of water. Place pureed raspberries in a separate bowl and keep refrigerated until use.
2. Spoon 2 tablespoons of the  blueberry mixture into the bottom of each popsicle mold. After each pour you’ll need to do a little clean up, you don’t want too much extra on the sides of the mold as this will cause your stripes to look a little mangled. Don’t get too fussy because you want it to look a little rustic.
3. Put the mold in the freezer and freeze for 1 hour.
4. Remove molds from freezer and add a small stipe (about 1 tablespoon) of vanilla yogurt to each mold. After you’ve added the first layer of yogurt, insert your popsicle sticks, trying to push them into the layer of blueberry a bit. Hold the sticks in place by placing a piece of tin foil over each mold. Place back in the freezer for another hour.
5. Remove molds from freezer, remove foil and add a small stripe (about 1 tablespoon) of raspberry puree. The sticks should stand on their own at this point so you won’t need the foil any longer.
6. Continue alternating white and red stripes, freezing for 1 hour after each, until you have filled the mold (I had 1 large layer of blueberries, 2 layers of raspberries & 3 layers of yogurt).
7. When you are ready to serve, hold the mold under hot running water to loosen (be careful not to let water splash near the opening), after about 30 seconds you should be able to easily remove the popsicle from the mold.

Leave a Reply